Study on bioleaching of primary chalcopyrite ore with thermoacidophilic archae

A high temperature-tolerating thermoacidophilic archae （TA） was isolated from water samples collected from a hot sulfur-containing spring in the Yunnan Province, China, and was used in bioleaching experiments of a low-grade chalcopyrite ore. The TA grow at temperatures ranging from 40 to 80℃, with 65℃ being the optimum temperature, and at pH values of l.5 to 4.0, with an optimum pH value of 2.0. The bioleaching experiments of the chalcvpyrite ore were conducted in both laboratory batch bioreactors and leaching columns. The results obtained from the bioreactor experiments showed that the TA bioleaching rate of copper reached 97% for a 12-day leaching period, while the bioleaching rate was 32.43% for thiobacillus ferrooxidans （Tf） leaching for the same leaching time. In the case of column leaching, tests of a two-phase leaching （196 days）, that is, a two-month （56 days） Tf leaching in the first phase, followed by a 140-day TA leaching in the second phase were performed. The average leaching rate of copper achieved for the 140-day TA leaching was 195mg/（L.d）, while for the control experiments, it was as low as 78mg/（L .d） for the Tf leaching, indicating that the TA possesses a more powerful oxidizing ability to the chalcopyrite than Tf Therefore, it is suggested that the two-phase leaching process be applied to .for the heap leaching operations, whereas, the TA can be used in the second phase when the temperature inside the heap has increased, and the primary copper sulfide minerals have already been partially oxidized with Tf beforehand in the first phase.     

3300mm轧机辊缝位置控制系统的研制

介绍3300mm中厚板可逆热轧机辊缝调整机构的组成,设计了3300mm轧机辊缝位置控制系统控制方案,给出了该方案中压下电机调速系统的设计过程,最终依据设计方案研制了辊缝控制系统,并在实际生产中运行使用。现场运行结果表明,用有准备切换逻辑无环流控制系统控制压下电机的辊缝位置,性能稳定,定位迅速,控制精度达到±0.3mm。宝钛集团使用该设备生产的钛及钛合金中厚板、镍板、锆及锆合金板等质量达到国际同类产品的先进水平。     

甲硫基乙醛肟的合成工艺研究

本文研究了以乙醛肟为原料合成甲硫基乙醛肟的工艺。对各种因素对产品收率的影响进行了试验，找出了最佳工艺条件。经过工业性试验，证明本工艺安全可靠，收率稳定，产品质量好，经济效益高。     

非均相固定化酶促反应中“抗激发互交作用”的解析分析与定量计算

通过理论推导证明：在外扩散与化学抑制共存的非均相固定化酶促反应中，总有效系数η为外扩散有效系数ηｄｉｆ和化学抑制有效系数ηｃｈ的乘积，并且分别小于相应的ηｄｉｆ和ηｃｈ；从数学上解释了外扩散抑制和一般性化学抑制间所存在的“抗激发互交作用”。利用所得公式计算表明：底物浓度对外扩散与竞争性、非竞争性和反竞争性等不同化学抑制共存的非均相固定化酶促反应有明显不同的影响；扩散抑制均显著地影响非均相固定化酶促反应，使得反应体系的总有效系数随抑制作用的增加而明显减小，从而对这类反应有了更进一步的认识     

Carbon nanofibers: Synthesis, characterization, and electrochemical properties

Carbon nanofibers (CNFs) have been synthesized by co-catalyst deoxidization process by a reaction between C₂H₅OC₂H₅, Zn and Fe powder at 650 °C for 10 h. These nanofibers exhibit diameters of ∼80 nm and lengths ranging from several micrometers to tens of micrometers. X-ray diffraction, Raman spectroscopy, and high-resolution transmission electron microscopy indicate that as-prepared CNFs possess low graphitic crystallinity. The resultant CNFs as electrode shows capacity of ∼220 mAh/g and high reversibility with little hysteresis in the insertion/deintercalation reactions of lithium-ion. In addition, the possible growth of CNFs is discussed.     

常压酸碱法造纸新工艺的废水处理

简述了江西三森纸业有限公司采用的非木纤维常压酸碱法造纸新工艺流程,并进行了该工艺的清洁生产分析.根据该工艺的特点,分析了该公司采用"物化 生化"的废水处理方案的可行性,并提供了方案的设计参数和预期处理效果.     

聚丙烯纤维水相异相接枝马来酸酐

本文研究了用水相异相法在聚丙烯纤维上接枝马来酸酐，用称重法测定接枝率，结果认为，随着反应中使用的马来酸酐和过硫酸铵浓度的提高，所得产物的接枝率显著提高，而反应温度和反应时间的影响则是开始随温度升高和时间延长接枝率上升，达到最大值后下降，在本实验中，各种反应条件下，都可以得到超过1．8％的接枝率。     

铵盐体系香波泡沫性能的研究

研究了两种铵盐型阴离子表面活性剂与烷基单乙醇酰胺、烷基二乙醇酰胺等复配体系在不同水硬度条件下的泡沫性能 ;考察了乳化硅油、羊毛脂、十八醇、珠光剂、香精、阳离子表面活性剂及聚合阳离子化合物等添加剂在香波体系中不同水硬度条件下对发泡性能的影响。实验条件下所有体系的稳泡性均较好 ,LSA与AESA复配后泡沫力增大 ,其中AE SA含量需 <1 0 % ;含烷基单乙醇酰胺香波体系的泡沫性能优于含烷基二乙醇酰胺的 ;羊毛脂和乳化硅油对香波泡沫的影响较大 ,而其它添加剂对香波泡沫的影响不大。     

纳米陶瓷及其纳米复相陶瓷的研究现状

综述了纳米陶瓷和纳米复相陶瓷的的研究现状．探讨了纳米陶瓷的力学性能及其热喷涂纳米陶瓷涂层存在的问题．分析了纳米复相陶瓷的增韧机理，为纳米陶瓷的研究和应用提供了理论依据。